Grafityp GCMS

[walterB]

Ink bleeding

- Check that the correct colour profile has been selected and that the ink limit has not been altered; also make sure you are using the correct linearization.
- Check the temperature settings of the heating system (pre and/or post heat settings etc). It is possible that they are too low.
- Try adjusting the print speed, print head interval or idle time between passes, head speed, media motion speed, ...)
- Check whether the correct printer driver is being used. Also
make sure the printer driver version is up to date.
- Check the Dithering setting. Changing the patterns will reflect in the printout.
- Check that the dot size has not been altered or has been set incorrectly.